Japan's industrial output value of China mold tooling

    In this environment, efforts to bail out customers to create new attractive Japanese die makers and machine tool manufacturers are also remarkable. This charm is ultra-precision ①, ② long life, ③ high-speed three areas. This will be through the "INTERMOLD2010" will be seen and heard about Japan in the field of mold charm. 

    "Including freight, the price is only 60 to 70 percent in Japan." In the mold processing technology exhibition "INTERMOLD2010" on the part of Dalian City, exhibited processing and mold makers mold parts, and explain the exhibits placed next to the name and simple performance index cards on which very prominently marked price. Lower than in Japan by the mold into the low prices to attract 3,4, "there are already more than 10 Japanese companies and we have a deal in recent years, customers have been increasing." 

    Not only cheap, but China's technological level and indeed die in rapidly. Manufacture of super-hard alloy bar and Hunan, with its mold powder metallurgy processing company employee said: "China and Japan die precision die is already very close. There's even made a few tenths of μm surface roughness of the mold." 

    Some Chinese Wishsino Plastic Mold Making Company used to 0.2μ ~ 0.3μm particle size of fine raw materials, developed a high hardness, flexural strength (bending strength) excellent super-hard alloy bars. Can be used in the manufacture of hard materials for cutting the workpiece and the cutter bit. But also can be used as part of the mold material. Performance indicators, Rockwell hardness (HRA) was 92.0, bending force 4GPa, mm inferior to the Japanese manufacturer of tungsten carbide products. 

    In addition, Wishsino Plastic Mold Making Company is also engaged in the motor rotor mold business, business to the Japanese precision equipment supplier. In order to suppress eddy currents produce iron loss, the motor rotor by layering generally only a few tenths of mm in the thickness of silicon steel plates to manufacture. The stamping process used for the thin and brittle silicon steel plate punching, the technically difficult. Therefore, the company with the mold in Japan, achieved excellent results. The same price "lower than the Japanese manufacturers 6 to 7 percent." 

 

Completely offset by the disparity in power management to 

    However, the strength of Chinese mold makers, "uneven." Well-known case of a Chinese mold makers mold manufacturers in Japan president warned: "Although there are many Chinese manufacturers have come up with a good accuracy of the sample, but mold is completely far from the production accuracy is more serious is that some Although Chinese manufacturers with the most advanced machine tools, boasted 'ability to manufacture precision than the Japanese manufacturers', but in fact this is propaganda cover for the receipt of the deposit will be 'impossible' for the origin of the stall. " 

    Dalian Hongsheng Machinery Co., Ltd. China Morita, general manager, said the mold in the technical strength of Japan less than a condition attached. That is, the Japanese need to have experienced technical staff and management guidance. Because he believes that "completely to the Chinese people responsible, then there can not maintain the quality of the risk." Therefore, the Japanese company's management through the use of a thorough management to ensure the accuracy and quality of the mold. 

    Found on both the technical and financial reliability of the Chinese mold makers, full use of its advantages of low prices to lower their costs. This approach Japanese companies in the future will expand. 

    If able to purchase low-price manufacturers from China to the high level of mold, then, of course, Japanese customers in Japan will be asked to provide China sourcing mold mold can not provide added value. 

    Japan's hollowing out of the mold industry in the domestic industry, the rise of China's mold industry and led to Lehman under the influence of the economic downturn into a corner. As a result, the number of Japanese die makers from more than 8,000 in 2000 down to 5,000 in 2008, mold production also fell by half, from 2002 down to about 100 million units in 2009 over 500,000 units. Mold manufacturer reference number of the Japanese Ministry of Economy, "Industrial Statistics", the output light of the Japanese Ministry of Economy of the "machine statistics." 

    In this environment, efforts to bail out customers to create new attractive mold makers and machine tool manufacturers in Japan is very eye-catching. This charm exists in the ultra-precision ①, ② long life, ③ high-speed three areas.