Thermal insulation coating to the mold die 80% energy saving
In fact, die with our lives, our lives more than 90% of the items to be processed through the die, and 95% of goods go through high-temperature mold casting, the temperature must reach 300 ℃ above normal. Mold is used for industrial or commercial production of injection molding, blow molding, extrusion, casting or forging molding, smelting, stamping, drawing and other methods to get all the necessary products and tools for mold.
As the special shape of the mold, not the traditional insulation materials insulation, mold temperatures on the loss of a great heat, severe heat loss, high temperature thermal fatigue of metal mold so big loss. Great loss of heat the mold, not only directly increase the cost of production, and frequent replacement of mold caused by a large number of production line shutdown frequently result in greater economic losses.
High-temperature insulation coatings mold successfully used to solve the vast resources of the mold industry loss problems. The only production by the mold temperature insulation coatings manufacturers, Beijing Hua Wei Chi Sheng Chemical Co., Ltd., the ZS-1 high-temperature thermal insulation coating, thermal conductivity coefficient of 0.03W/mK, temperature 1800 ℃, can inhibit heat conduction and radiation of heat, thermal insulation efficiency of up to 90% inhibition, across more than 80% live in mold heat, causing the internal temperature of the mold well, the outer surface temperature is not hot people. Coating at 1100 ℃ mold coated with 8mm thick, the mold surface temperature can be reduced from 1100 ℃ to 100 ℃ or less. Wei Sheng Zhi Hua Die Another high-temperature thermal insulation coating chloride ion content is zero, but also to prevent air or wet process chloride, sulfide into contact with the metal surface, the metal mold to play a very good corrosion protection, not will lead to embrittlement of metal weld seam, ZS-1 Zhisheng mold temperature coefficient of thermal insulating coating is high, there is a very good high temperature insulation.
Chi Sheng brushing mold temperature insulation coatings, the heat loss can reach 80% energy saving and mold metal corrosion rate has dropped 60%, 100% increase personnel safety, the efficiency of enterprises increased by 30 percent, double the safety factor of industrial production .
Industrial production mold is an important part of the mold insulation, industrial production increased safety factor to prevent personal injury and property damage and other production accidents, to eliminate or control dangerous and harmful factors, personal safety and health protection, equipment and facilities from damage, which are of great significance.
[ Author: simon] [ Date: 9/20/2011 ] [ Hits: ]
